Work Smarter «» Save Your Back
Stout's Back Saver Grip
Made in the U.S.A -- Limited Lifetime Warranty

Installation onto a Fishing Pole


    Because a fishing pole is constructed using foam on the exterior, here’s a slight modification of our installation instructions:

  1. Place fishing pole on a flat surface
  2. Place BackSaver Grip five inches above the reel.
  3. Install all four thumb screws and wing nuts and tighten evenly, until the Grip is firmly in place and will not twist.
  4. Wait at least one hour, until the foam has had time to compress.
  5. Retighten nuts, if necessary.
  6. Go catch the big one.

Sold Exclusively by:                                 1.800.752.7874

BackSaver Grip, LLC.                             Visit us on the Web at

555 S. Industrial Drive-Suite 209            www.backsavergrip.com

Hartland, WI. 53029

This product carries a two year warranty. If your Grip ever breaks, call or email us with your name, address, phone number and a brief explanation of what happened. A new Grip will be sent to you promptly.